Loading...
Loading...
Loading...
Loading...
Barnes Bullets
The Barnes TSX .35 caliber rifle bullet delivers the controlled expansion and weight retention that serious reloaders demand for big-game hunting. Built from 100-percent copper construction, these 200-grain flat-base projectiles are engineered to create four sharp-edged petals upon impact, maximizing tissue and bone penetration while maintaining their original mass downrange. Whether you're handloading for .358 Winchester, .35 Remington, or another .358-diameter cartridge, TSX ammunition components offer the terminal performance and consistency that turn ethical, one-shot opportunities into reality.
Barnes designed the TSX to handle the toughest conditions: dense hide, heavy bone, and deep vital zones. The all-copper construction eliminates lead and delivers straight-line penetration without fragmenting, so you retain the weight and energy you need to anchor game cleanly. Reloaders appreciate the predictable expansion and the bullet's compatibility across a wide range of powders and primers when seated within the manufacturer's recommended jump distance of 0.03 to 0.07 inches.
This 50-count box gives you enough components to develop loads and build confidence in the field. If you're serious about handloading for .35-caliber rifles and want bullets that perform consistently across varying distances and angles, TSX components are proven medicine.
| Caliber | .35 (0.358") |
| Weight | 200 grains |
| Base Type | Flat Base (FB) |
| Material | 100% Copper |
| Count Per Box | 50 |
| Recommended Seating Depth Jump | 0.03–0.07 inches (consult your rifle) |
These 0.358-inch bullets are designed for .35-caliber rifle cartridges. Common applications include .358 Winchester, .35 Remington, and other .35-caliber rounds. Always verify your rifle's chamber and bore diameter before loading; consult your rifle's manual or a gunsmith if uncertain.
Bullets that shed pieces during expansion lose energy and penetrating power. Barnes TSX bullets are engineered to retain 100 percent of their original mass, ensuring consistent deep penetration through bone and vital organs—critical for ethical, quick kills on big game.
Barnes recommends seating depth between 0.03 and 0.07 inches of jump (distance from bullet tip to the rifling). The exact optimal distance varies by rifle, so start at the middle of that range and work up or down while testing for accuracy and pressure in your specific firearm.
This is a reloading component—a box of 50 projectiles only. You will need to source brass cases, primers, and powder separately to assemble complete cartridges.
Barnes Bullets
The Barnes TSX .35 caliber rifle bullet delivers the controlled expansion and weight retention that serious reloaders demand for big-game hunting. Built from 100-percent copper construction, these 200-grain flat-base projectiles are engineered to create four sharp-edged petals upon impact, maximizing tissue and bone penetration while maintaining their original mass downrange. Whether you're handloading for .358 Winchester, .35 Remington, or another .358-diameter cartridge, TSX ammunition components offer the terminal performance and consistency that turn ethical, one-shot opportunities into reality.
Barnes designed the TSX to handle the toughest conditions: dense hide, heavy bone, and deep vital zones. The all-copper construction eliminates lead and delivers straight-line penetration without fragmenting, so you retain the weight and energy you need to anchor game cleanly. Reloaders appreciate the predictable expansion and the bullet's compatibility across a wide range of powders and primers when seated within the manufacturer's recommended jump distance of 0.03 to 0.07 inches.
This 50-count box gives you enough components to develop loads and build confidence in the field. If you're serious about handloading for .35-caliber rifles and want bullets that perform consistently across varying distances and angles, TSX components are proven medicine.
| Caliber | .35 (0.358") |
| Weight | 200 grains |
| Base Type | Flat Base (FB) |
| Material | 100% Copper |
| Count Per Box | 50 |
| Recommended Seating Depth Jump | 0.03–0.07 inches (consult your rifle) |
These 0.358-inch bullets are designed for .35-caliber rifle cartridges. Common applications include .358 Winchester, .35 Remington, and other .35-caliber rounds. Always verify your rifle's chamber and bore diameter before loading; consult your rifle's manual or a gunsmith if uncertain.
Bullets that shed pieces during expansion lose energy and penetrating power. Barnes TSX bullets are engineered to retain 100 percent of their original mass, ensuring consistent deep penetration through bone and vital organs—critical for ethical, quick kills on big game.
Barnes recommends seating depth between 0.03 and 0.07 inches of jump (distance from bullet tip to the rifling). The exact optimal distance varies by rifle, so start at the middle of that range and work up or down while testing for accuracy and pressure in your specific firearm.
This is a reloading component—a box of 50 projectiles only. You will need to source brass cases, primers, and powder separately to assemble complete cartridges.
