Loading...
Loading...
Loading...
Loading...
Armaspec
The Armaspec Elev8 Low Dive is a precision optic riser designed to mount holographic sights and red dots on standard Picatinny rails with confident repeatability. Built for shooters who run lower 1/3 co-witness optics—like the EOTech EXPS or Vortex UH-1—this aluminum and steel riser elevates your sight's optical center line to 2.26 inches above the rail, putting your reticle naturally in your line of sight and cutting the time it takes to get on target. Whether you're training at the range, running night vision for low-light work, or shooting with protective gear like a gas mask, the added height transforms how your gun handles and how fast you can shoot accurately.
Armaspec engineered the Elev8 Low Dive from 7075 T6 aluminum and 4140 steel, finished in Type III hard coat anodize for durability in the field. The design includes relief cuts that keep weight minimal without compromising rigidity—important when every ounce counts on a rifle build. Made in the USA, this riser is a straightforward, no-nonsense platform that works with a wide range of common optics and plays well with lower 1/3 mounting systems.
If you've felt that your optic sits too low, forcing you to crane your neck or lift your cheek from the stock, a quality riser makes an immediate, practical difference. The Elev8 Low Dive is the kind of piece that doesn't draw attention but quietly improves your shooting geometry and ergonomics every time you bring the gun up.
| Material | 7075 T6 Aluminum / 4140 Steel |
| Finish | Type III Hard Coat Anodized |
| Optical Center Height | 2.26 inches above Picatinny rail |
| Rail Mount | Standard Picatinny |
| Optic Compatibility | Lower 1/3 co-witness holographic and red dot sights |
| Country of Origin | USA |
This riser is designed for lower 1/3 co-witness mounted optics. It works well with the EOTech EXPS, Vortex UH-1, and many other holographic and red dot sights that use standard lower 1/3 mounting. Check your optic's mounting specification to confirm compatibility.
Yes. The 2.26-inch height helps position your optic for more comfortable passive night vision use and allows better sight alignment when shooting with protective gear like a gas mask. The added elevation brings the reticle more naturally into your line of sight in these scenarios.
The Elev8 Low Dive is designed with relief cuts to minimize weight while maintaining structural strength. Exact weight is not specified, but the design prioritizes a low-mass platform suitable for modern carbine builds.
The riser is constructed from 7075 T6 aluminum and 4140 steel, finished with a Type III hard coat anodize. This combination offers durability and corrosion resistance in field conditions. It is manufactured in the USA.
Armaspec
The Armaspec Elev8 Low Dive is a precision optic riser designed to mount holographic sights and red dots on standard Picatinny rails with confident repeatability. Built for shooters who run lower 1/3 co-witness optics—like the EOTech EXPS or Vortex UH-1—this aluminum and steel riser elevates your sight's optical center line to 2.26 inches above the rail, putting your reticle naturally in your line of sight and cutting the time it takes to get on target. Whether you're training at the range, running night vision for low-light work, or shooting with protective gear like a gas mask, the added height transforms how your gun handles and how fast you can shoot accurately.
Armaspec engineered the Elev8 Low Dive from 7075 T6 aluminum and 4140 steel, finished in Type III hard coat anodize for durability in the field. The design includes relief cuts that keep weight minimal without compromising rigidity—important when every ounce counts on a rifle build. Made in the USA, this riser is a straightforward, no-nonsense platform that works with a wide range of common optics and plays well with lower 1/3 mounting systems.
If you've felt that your optic sits too low, forcing you to crane your neck or lift your cheek from the stock, a quality riser makes an immediate, practical difference. The Elev8 Low Dive is the kind of piece that doesn't draw attention but quietly improves your shooting geometry and ergonomics every time you bring the gun up.
| Material | 7075 T6 Aluminum / 4140 Steel |
| Finish | Type III Hard Coat Anodized |
| Optical Center Height | 2.26 inches above Picatinny rail |
| Rail Mount | Standard Picatinny |
| Optic Compatibility | Lower 1/3 co-witness holographic and red dot sights |
| Country of Origin | USA |
This riser is designed for lower 1/3 co-witness mounted optics. It works well with the EOTech EXPS, Vortex UH-1, and many other holographic and red dot sights that use standard lower 1/3 mounting. Check your optic's mounting specification to confirm compatibility.
Yes. The 2.26-inch height helps position your optic for more comfortable passive night vision use and allows better sight alignment when shooting with protective gear like a gas mask. The added elevation brings the reticle more naturally into your line of sight in these scenarios.
The Elev8 Low Dive is designed with relief cuts to minimize weight while maintaining structural strength. Exact weight is not specified, but the design prioritizes a low-mass platform suitable for modern carbine builds.
The riser is constructed from 7075 T6 aluminum and 4140 steel, finished with a Type III hard coat anodize. This combination offers durability and corrosion resistance in field conditions. It is manufactured in the USA.
