Loading...
Loading...
Loading...
Loading...
Area 419
The Area 419 Zero Reloading Turret Press with 7/8 head is purpose-built for reloaders who want precision, efficiency, and repeatability without the frustration of die slop. This turret-style press eliminates the variability that comes from constantly removing and resetting dies—the zero-slop turret head keeps everything tight and consistent, so you spend less time chasing runout and more time at the bench or range. Whether you're loading for match rifles, hunting loads, or high-volume practice ammunition, this press is engineered to make your workflow faster and more reliable.
Area 419 designed this press around what actually matters to serious reloaders. The 4.4" ram stroke handles even large magnum cases without compromise, and the 4.75" total opening gives you plenty of clearance without unnecessary shellholder protrusion at the bottom of the stroke. The turret accepts 7/8-inch threaded dies, and the bearing-guided ram motion delivers efficient energy transfer from your handle stroke to the dies—you'll feel the difference in control and consistency. The internally contained primer catch system is a quality-of-life upgrade; no more surgical tubing and baby food jars cluttering your setup.
Build quality matters in a press you'll use hundreds of times per reloading session, and Area 419 backs that up with domestically sourced materials and manufacturing. The handle setup is adjustable and interchangeable, so you can dial in leverage and feel for your style of work. This is a press designed by reloaders for reloaders—no gimmicks, no oversized marketing claims, just thoughtful engineering that shows up in repeatability and ease of use.
| Turret Head Thread | 7/8 inch |
| Ram Stroke | 4.4 inches |
| Total Opening | 4.75 inches |
| Press Type | Turret |
| Primer Catch System | Internally contained |
| Manufacture | USA |
The Area 419 Zero Turret Press uses 7/8-inch threaded dies, which is the standard for most quality reloading die sets on the market.
Yes. The 4.4-inch ram stroke is designed to handle large magnum cases without running out of travel, and the 4.75-inch total opening provides the clearance you need.
The zero-slop turret head stays tight and consistent when you swap between dies, eliminating the variability that occurs when you remove and reset dies in a traditional press. This means more repeatable results and less time fiddling with die seating.
Yes, the primer catch system is internally contained in the press—no external tubing or separate containers needed.
Area 419
The Area 419 Zero Reloading Turret Press with 7/8 head is purpose-built for reloaders who want precision, efficiency, and repeatability without the frustration of die slop. This turret-style press eliminates the variability that comes from constantly removing and resetting dies—the zero-slop turret head keeps everything tight and consistent, so you spend less time chasing runout and more time at the bench or range. Whether you're loading for match rifles, hunting loads, or high-volume practice ammunition, this press is engineered to make your workflow faster and more reliable.
Area 419 designed this press around what actually matters to serious reloaders. The 4.4" ram stroke handles even large magnum cases without compromise, and the 4.75" total opening gives you plenty of clearance without unnecessary shellholder protrusion at the bottom of the stroke. The turret accepts 7/8-inch threaded dies, and the bearing-guided ram motion delivers efficient energy transfer from your handle stroke to the dies—you'll feel the difference in control and consistency. The internally contained primer catch system is a quality-of-life upgrade; no more surgical tubing and baby food jars cluttering your setup.
Build quality matters in a press you'll use hundreds of times per reloading session, and Area 419 backs that up with domestically sourced materials and manufacturing. The handle setup is adjustable and interchangeable, so you can dial in leverage and feel for your style of work. This is a press designed by reloaders for reloaders—no gimmicks, no oversized marketing claims, just thoughtful engineering that shows up in repeatability and ease of use.
| Turret Head Thread | 7/8 inch |
| Ram Stroke | 4.4 inches |
| Total Opening | 4.75 inches |
| Press Type | Turret |
| Primer Catch System | Internally contained |
| Manufacture | USA |
The Area 419 Zero Turret Press uses 7/8-inch threaded dies, which is the standard for most quality reloading die sets on the market.
Yes. The 4.4-inch ram stroke is designed to handle large magnum cases without running out of travel, and the 4.75-inch total opening provides the clearance you need.
The zero-slop turret head stays tight and consistent when you swap between dies, eliminating the variability that occurs when you remove and reset dies in a traditional press. This means more repeatable results and less time fiddling with die seating.
Yes, the primer catch system is internally contained in the press—no external tubing or separate containers needed.
