Area 419 Full Cantilever One Piece Scope Mount 36Mm Diam 39Mm Height 20 MoaArea 419$350.00
Loading...
Loading...
Loading...
Loading...
Area 419
The Area 419 Full Cantilever One Piece Scope Mount is a precision-engineered 36mm cantilever mount built for shooters who demand repeatable accuracy and rock-solid optic security. If you're running a modern rifle setup—whether tactical, hunting, or precision rifle—and you want a scope mount that's been stress-tested to withstand serious use without degradation, this American-made alternative to typical two-piece designs delivers the rigidity and consistency that separate good shooting from great shooting.
What sets this mount apart is Area 419's commitment to manufacturing process as much as the final product. Unlike mounts that are machined, anodized, and casually assembled, these are fully torqued to spec, returned to the machine for final boring as complete sets, and QC'd before shipment. That extra step—boring after final assembly—means the scope contact surfaces are precision-matched to each other, giving your optic a more uniform grip across both rings. The raw aluminum internal surfaces bite harder and hold tighter than anodized rings, without adding unnecessary weight.
Built from American 7075 aluminum with steel guide pins, inset clamping feet, and separate rail clamping bars, this mount balances robustness with practical weight management. The cantilever design (traditional AR-style at 39mm height) positions your scope for optimal cheek weld and sight picture, while multiple accessory mounting points and maximum rail utility give you options for integrated accessories down the road.
This is a no-compromise scope mount for shooters who understand that foundation matters. It's not cheap engineering—it's deliberate engineering.
| Brand | Area 419 |
| Mount Type | Full Cantilever, One-Piece |
| Scope Tube Diameter | 36mm |
| Mounting Height | 39mm (1.54″) |
| MOA | 0 MOA |
| Material | 7075 Aluminum (milled in USA); Stainless Steel Hardware |
| Ring Surfaces | Raw Aluminum, Precision-Bored |
| Weight | 8–9 oz (approximate, varies by model) |
| Rail Interface | Picatinny |
Any rifle scope with a 36mm tube diameter will fit this mount. Check your optic's tube diameter specifications before ordering.
Yes, the cantilever design is built for Picatinny rail systems common to modern AR platforms and other tactical rifles. The 39mm height is a traditional AR-style cantilever, optimized for sight picture and cheek weld on rifles with integrated upper receivers.
Area 419 assembles the mount completely, then returns it to precision CNC equipment to bore both rings as a matched pair. This ensures the scope contact surfaces in the front and rear rings are precisely aligned and matched to each other—delivering more uniform clamping force and better repeatability than mounting rings bored separately.
This is a 0 MOA mount, meaning it clamps straight to the rail without built-in vertical adjustment. Elevation adjustments are handled by your scope's internal turrets.
Area 419
The Area 419 Full Cantilever One Piece Scope Mount is a precision-engineered 36mm cantilever mount built for shooters who demand repeatable accuracy and rock-solid optic security. If you're running a modern rifle setup—whether tactical, hunting, or precision rifle—and you want a scope mount that's been stress-tested to withstand serious use without degradation, this American-made alternative to typical two-piece designs delivers the rigidity and consistency that separate good shooting from great shooting.
What sets this mount apart is Area 419's commitment to manufacturing process as much as the final product. Unlike mounts that are machined, anodized, and casually assembled, these are fully torqued to spec, returned to the machine for final boring as complete sets, and QC'd before shipment. That extra step—boring after final assembly—means the scope contact surfaces are precision-matched to each other, giving your optic a more uniform grip across both rings. The raw aluminum internal surfaces bite harder and hold tighter than anodized rings, without adding unnecessary weight.
Built from American 7075 aluminum with steel guide pins, inset clamping feet, and separate rail clamping bars, this mount balances robustness with practical weight management. The cantilever design (traditional AR-style at 39mm height) positions your scope for optimal cheek weld and sight picture, while multiple accessory mounting points and maximum rail utility give you options for integrated accessories down the road.
This is a no-compromise scope mount for shooters who understand that foundation matters. It's not cheap engineering—it's deliberate engineering.
| Brand | Area 419 |
| Mount Type | Full Cantilever, One-Piece |
| Scope Tube Diameter | 36mm |
| Mounting Height | 39mm (1.54″) |
| MOA | 0 MOA |
| Material | 7075 Aluminum (milled in USA); Stainless Steel Hardware |
| Ring Surfaces | Raw Aluminum, Precision-Bored |
| Weight | 8–9 oz (approximate, varies by model) |
| Rail Interface | Picatinny |
Any rifle scope with a 36mm tube diameter will fit this mount. Check your optic's tube diameter specifications before ordering.
Yes, the cantilever design is built for Picatinny rail systems common to modern AR platforms and other tactical rifles. The 39mm height is a traditional AR-style cantilever, optimized for sight picture and cheek weld on rifles with integrated upper receivers.
Area 419 assembles the mount completely, then returns it to precision CNC equipment to bore both rings as a matched pair. This ensures the scope contact surfaces in the front and rear rings are precisely aligned and matched to each other—delivering more uniform clamping force and better repeatability than mounting rings bored separately.
This is a 0 MOA mount, meaning it clamps straight to the rail without built-in vertical adjustment. Elevation adjustments are handled by your scope's internal turrets.
