Loading...
Loading...
Loading...
Loading...
Ar Takedown Tool
The AR TT-1 AR Takedown Tool is a compact, hammerless multi-tool purpose-built for AR-15 and M4 platform maintenance and field stripping. Whether you're a range shooter doing routine cleaning, a hunter breaking down your rifle in the field, or a gunsmith working on the bench, this 6-5/16" pen-sized tool consolidates what would otherwise be a drawer full of separate punches, hammers, and pin removers into a single, pocket-friendly solution. At just 2 ounces, it's light enough to throw in a range bag, truck console, or hunting pack without adding weight.
The genius of the AR TT-1 lies in its hammerless design and brass contact points. Forget babying your receiver finish while tapping pins out with improvised tools—the precision brass ends deliver controlled force without marring, dings, or dents. The tool generates 5,000 PSI of focused pressure, giving you the mechanical advantage to drive out stubborn pins and springs without the hand-numbing impact of a hammer strike. The body itself is heat-treated black oxide steel, built for the kind of daily use gunsmiths and armorer actually put tools through.
This is a working tool, not a gimmick. It handles the full spectrum of AR disassembly and reassembly: takedown pins, trigger pins, detent pins, cotter pins, pressure pins, roll pins, firing pins, buffer springs, and pivot pin work. The dual-function design means you're not hunting for three different pin punches for three different pin sizes—one tool does the job. Made entirely in the USA, it's the kind of bare-essentials tool that earns a permanent spot in your maintenance kit.
| Brand | AR Takedown Tool |
| Model | AR TT-1 |
| Tool Type | 12-in-1 Hammerless Multi-Tool |
| Compatibility | AR-15, M4, and entire AR platform |
| Overall Length | 6-5/16" |
| Diameter | 1/2" |
| Weight | 2 oz |
| Contact Points Material | Brass |
| Body Material | Heat-treated black oxide steel |
| Force Rating | 5,000 PSI |
| Made in | USA |
Yes. The AR TT-1 is designed for the entire AR platform, including AR-15 and M4 variants. It handles all common pins and springs across these platforms.
The hammerless design delivers precise, controlled 5,000 PSI force without the impact that can slip and damage your receiver finish or components. The brass contact points won't mar your gun, and you get the same or better results without hand fatigue or noise.
Yes. The AR TT-1 handles both field stripping (takedown pins, charging handle, bolt carrier group removal) and detailed disassembly, including trigger pins, detent pins, firing pin, buffer spring, roll pins, cotter pins, pressure pins, and pivot pin work.
No. At just 6-5/16" long and 2 ounces, it's compact enough to pocket, but the brass leveraging system and 5,000 PSI force rating make it capable of the same—or harder—work as much larger tool sets. The size is a feature, not a limitation.
Ar Takedown Tool
The AR TT-1 AR Takedown Tool is a compact, hammerless multi-tool purpose-built for AR-15 and M4 platform maintenance and field stripping. Whether you're a range shooter doing routine cleaning, a hunter breaking down your rifle in the field, or a gunsmith working on the bench, this 6-5/16" pen-sized tool consolidates what would otherwise be a drawer full of separate punches, hammers, and pin removers into a single, pocket-friendly solution. At just 2 ounces, it's light enough to throw in a range bag, truck console, or hunting pack without adding weight.
The genius of the AR TT-1 lies in its hammerless design and brass contact points. Forget babying your receiver finish while tapping pins out with improvised tools—the precision brass ends deliver controlled force without marring, dings, or dents. The tool generates 5,000 PSI of focused pressure, giving you the mechanical advantage to drive out stubborn pins and springs without the hand-numbing impact of a hammer strike. The body itself is heat-treated black oxide steel, built for the kind of daily use gunsmiths and armorer actually put tools through.
This is a working tool, not a gimmick. It handles the full spectrum of AR disassembly and reassembly: takedown pins, trigger pins, detent pins, cotter pins, pressure pins, roll pins, firing pins, buffer springs, and pivot pin work. The dual-function design means you're not hunting for three different pin punches for three different pin sizes—one tool does the job. Made entirely in the USA, it's the kind of bare-essentials tool that earns a permanent spot in your maintenance kit.
| Brand | AR Takedown Tool |
| Model | AR TT-1 |
| Tool Type | 12-in-1 Hammerless Multi-Tool |
| Compatibility | AR-15, M4, and entire AR platform |
| Overall Length | 6-5/16" |
| Diameter | 1/2" |
| Weight | 2 oz |
| Contact Points Material | Brass |
| Body Material | Heat-treated black oxide steel |
| Force Rating | 5,000 PSI |
| Made in | USA |
Yes. The AR TT-1 is designed for the entire AR platform, including AR-15 and M4 variants. It handles all common pins and springs across these platforms.
The hammerless design delivers precise, controlled 5,000 PSI force without the impact that can slip and damage your receiver finish or components. The brass contact points won't mar your gun, and you get the same or better results without hand fatigue or noise.
Yes. The AR TT-1 handles both field stripping (takedown pins, charging handle, bolt carrier group removal) and detailed disassembly, including trigger pins, detent pins, firing pin, buffer spring, roll pins, cotter pins, pressure pins, and pivot pin work.
No. At just 6-5/16" long and 2 ounces, it's compact enough to pocket, but the brass leveraging system and 5,000 PSI force rating make it capable of the same—or harder—work as much larger tool sets. The size is a feature, not a limitation.
