Loading...
Loading...
Loading...
Loading...
AeroPrecision
The Aero Precision M4E1T Complete Upper with 16" barrel is a fully assembled upper receiver ready to pair with your AR-15 lower—no gunsmithing required. Built around Aero Precision's M4E1 threaded upper receiver and paired with their new ATLAS R-ONE handguard, this upper delivers a modern, lightweight platform that doesn't compromise on attachment options or durability. Whether you're building a versatile rifle for the range, hunting, or duty use, this complete upper gets you most of the way there with quality components and honest engineering.
The M4E1 upper receiver features an enhanced forging with a billet aesthetic, M4 feed ramps for reliable feeding, and laser-engraved T-marks for indexing. The port door and forward assist come installed, and the threaded design pairs seamlessly with Aero's Enhanced Series handguards. The ATLAS R-ONE handguard uses Aero's proprietary attachment system to stay slim and light while delivering real estate for lights, grips, and other tactical hardware. Its full-length top picatinny rail plus quick-disconnect sling mounts at 3, 6, and 9 o'clock positions make it easy to customize your rifle your way.
You'll receive your choice of two barrel configs: a 16" mid-length 5.56 NATO with mid-length gas system, or an 18" rifle-length 5.56 NATO setup. Both are 4150 CrMoV with QPQ finish, 1/7 twist rate, and M4 feed ramp extensions. Each comes with a standard A2 flash hider—note that the muzzle device is not pinned or welded, so if you're building a rifle to 16" OAL, you'll need to have that done by a gunsmith to meet ATF requirements. HP and MPI tested for reliability. This upper ships assembled and ready to install on your lower receiver, but you'll need to source a bolt carrier group and charging handle separately.
| Upper Receiver | Aero Precision M4E1T Threaded, anodized black |
| Handguard | ATLAS R-ONE M-LOK, 15" (fits with both barrel options) |
| Barrel Length | 16" (mid-length) or 18" (rifle-length) |
| Barrel Material | 4150 CrMoV with QPQ finish |
| Twist Rate | 1/7 |
| Chambering | 5.56 NATO |
| Gas Block Journal | .750 diameter |
| Gas System | Mid-length (16") or rifle-length (18") with low-profile block |
| Muzzle Device | Standard A2 flash hider (not pinned or welded) |
| Feed Ramps | M4 extension |
| Handguard ID/OD | 1.3" / 1.5" |
| Compatibility | Mil-spec AR-15 upper receivers and barrels; low-profile gas blocks |
| Condition | Fully assembled |
| Not Included | Bolt carrier group, charging handle |
This is an assembled upper receiver ready to install. You'll need to pair it with an AR-15 lower receiver, bolt carrier group, and charging handle. The muzzle device is not pinned or welded—if your build requires a 16" OAL to meet legal requirements, have a gunsmith pin and weld the flash hider to the barrel.
The 16" mid-length barrel offers a compact package suited to hunting, home defense, and general-purpose shooting. The 18" rifle-length barrel gives you longer sight radius and slightly more velocity for range work and longer-range applications. Both use the same handguard and are compatible with low-profile gas blocks.
Yes. The ATLAS R-ONE handguard features full M-LOK attachment points along its length. The top is a continuous picatinny rail, and quick-disconnect sling mounts are built in at the 3, 6, and 9 o'clock positions.
No. This is an assembled upper receiver only. You'll need to source a BCG and charging handle separately and install them into the upper before pairing with your lower receiver.
AeroPrecision
The Aero Precision M4E1T Complete Upper with 16" barrel is a fully assembled upper receiver ready to pair with your AR-15 lower—no gunsmithing required. Built around Aero Precision's M4E1 threaded upper receiver and paired with their new ATLAS R-ONE handguard, this upper delivers a modern, lightweight platform that doesn't compromise on attachment options or durability. Whether you're building a versatile rifle for the range, hunting, or duty use, this complete upper gets you most of the way there with quality components and honest engineering.
The M4E1 upper receiver features an enhanced forging with a billet aesthetic, M4 feed ramps for reliable feeding, and laser-engraved T-marks for indexing. The port door and forward assist come installed, and the threaded design pairs seamlessly with Aero's Enhanced Series handguards. The ATLAS R-ONE handguard uses Aero's proprietary attachment system to stay slim and light while delivering real estate for lights, grips, and other tactical hardware. Its full-length top picatinny rail plus quick-disconnect sling mounts at 3, 6, and 9 o'clock positions make it easy to customize your rifle your way.
You'll receive your choice of two barrel configs: a 16" mid-length 5.56 NATO with mid-length gas system, or an 18" rifle-length 5.56 NATO setup. Both are 4150 CrMoV with QPQ finish, 1/7 twist rate, and M4 feed ramp extensions. Each comes with a standard A2 flash hider—note that the muzzle device is not pinned or welded, so if you're building a rifle to 16" OAL, you'll need to have that done by a gunsmith to meet ATF requirements. HP and MPI tested for reliability. This upper ships assembled and ready to install on your lower receiver, but you'll need to source a bolt carrier group and charging handle separately.
| Upper Receiver | Aero Precision M4E1T Threaded, anodized black |
| Handguard | ATLAS R-ONE M-LOK, 15" (fits with both barrel options) |
| Barrel Length | 16" (mid-length) or 18" (rifle-length) |
| Barrel Material | 4150 CrMoV with QPQ finish |
| Twist Rate | 1/7 |
| Chambering | 5.56 NATO |
| Gas Block Journal | .750 diameter |
| Gas System | Mid-length (16") or rifle-length (18") with low-profile block |
| Muzzle Device | Standard A2 flash hider (not pinned or welded) |
| Feed Ramps | M4 extension |
| Handguard ID/OD | 1.3" / 1.5" |
| Compatibility | Mil-spec AR-15 upper receivers and barrels; low-profile gas blocks |
| Condition | Fully assembled |
| Not Included | Bolt carrier group, charging handle |
This is an assembled upper receiver ready to install. You'll need to pair it with an AR-15 lower receiver, bolt carrier group, and charging handle. The muzzle device is not pinned or welded—if your build requires a 16" OAL to meet legal requirements, have a gunsmith pin and weld the flash hider to the barrel.
The 16" mid-length barrel offers a compact package suited to hunting, home defense, and general-purpose shooting. The 18" rifle-length barrel gives you longer sight radius and slightly more velocity for range work and longer-range applications. Both use the same handguard and are compatible with low-profile gas blocks.
Yes. The ATLAS R-ONE handguard features full M-LOK attachment points along its length. The top is a continuous picatinny rail, and quick-disconnect sling mounts are built in at the 3, 6, and 9 o'clock positions.
No. This is an assembled upper receiver only. You'll need to source a BCG and charging handle separately and install them into the upper before pairing with your lower receiver.
