Accu-Tac PC-5 QD Bipod - Precision Aluminum Construction, Quick-Detach, Sleek Black FinishAccu-Tac$491.15
Loading...
Loading...
Loading...
Loading...
Accu-Tac
The Accu-Tac WB-5 QD bipod is a precision shooting support built for shooters who demand stability without compromise. Whether you're setting up for long-range hunting, extreme distance competitions, or bench-rest accuracy work, this quick-detach bipod delivers the kind of rock-solid platform that separates good groups from great ones. The wide-body design positions your rifle between the legs for natural support and reduced recoil movement—exactly what you need when every shot counts.
Built from 6061 T6 aircraft-grade aluminum with high-strength steel hardware, the WB-5 is 100% billet construction that won't quit. The quick-detach Picatinny mount clicks onto a standard 1913 rail in seconds—no tools, no fussing. Once mounted, you've got four individual leg positions that deploy to either 90 or 45 degrees, each locking securely into place. Spring-loaded legs adjust independently so you can fine-tune your platform on uneven terrain or at the bench without breaking down the entire setup.
Height versatility comes from nine notch options ranging from 5.5 inches to 10 inches, letting you dial in the sight picture that works for your rifle and optic. The WB-5 also offers cant adjustment with a lever that locks to handle shooting angles—just remember: hand-tighten only, no tools needed. At under 24 ounces, it's substantial enough to do the job without turning into dead weight in your pack or on your rifle.
| Material | 6061 T6 aluminum alloy with high-strength steel hardware |
| Mount Type | Quick-detach 1913 Picatinny rail |
| Leg Positions | 4 positions (90° and 45° deployment) |
| Height Options | 9 notch positions |
| Minimum Height | 5.5" (140 mm) |
| Maximum Height | 10.0" (254 mm) |
| Minimum Stance | 11.0" (279.4 mm) |
| Maximum Stance | 17.25" (438.15 mm) |
| Closed Width | 5.0" (127 mm) |
| Weight | 23.92 oz |
| Finish | Black |
The WB-5 mounts to any Picatinny rail (1913 standard), which covers most modern rifle forends. The quick-detach system clicks on and off without tools, so it works equally well as a permanent mount or a quick-swap accessory between rifles.
The WB-5 ranges from 5.5 inches at minimum height to 10 inches at maximum, with nine notch positions in between. That spread covers bench shooting, prone positions, and most field setups. The nine steps let you dial in the exact sight picture your optic and rifle need.
Yes. Each of the four legs is independent—just pull the spring-loaded leg downward and lock it into your chosen position (90° or 45°). You can dial legs separately to handle uneven ground or adjust your shooting angle on the fly.
No. The WB-5 has a lever-locked cant adjustment for shooting at angles. Hand-tighten only—do not use tools to adjust canting tension.
Accu-Tac
The Accu-Tac WB-5 QD bipod is a precision shooting support built for shooters who demand stability without compromise. Whether you're setting up for long-range hunting, extreme distance competitions, or bench-rest accuracy work, this quick-detach bipod delivers the kind of rock-solid platform that separates good groups from great ones. The wide-body design positions your rifle between the legs for natural support and reduced recoil movement—exactly what you need when every shot counts.
Built from 6061 T6 aircraft-grade aluminum with high-strength steel hardware, the WB-5 is 100% billet construction that won't quit. The quick-detach Picatinny mount clicks onto a standard 1913 rail in seconds—no tools, no fussing. Once mounted, you've got four individual leg positions that deploy to either 90 or 45 degrees, each locking securely into place. Spring-loaded legs adjust independently so you can fine-tune your platform on uneven terrain or at the bench without breaking down the entire setup.
Height versatility comes from nine notch options ranging from 5.5 inches to 10 inches, letting you dial in the sight picture that works for your rifle and optic. The WB-5 also offers cant adjustment with a lever that locks to handle shooting angles—just remember: hand-tighten only, no tools needed. At under 24 ounces, it's substantial enough to do the job without turning into dead weight in your pack or on your rifle.
| Material | 6061 T6 aluminum alloy with high-strength steel hardware |
| Mount Type | Quick-detach 1913 Picatinny rail |
| Leg Positions | 4 positions (90° and 45° deployment) |
| Height Options | 9 notch positions |
| Minimum Height | 5.5" (140 mm) |
| Maximum Height | 10.0" (254 mm) |
| Minimum Stance | 11.0" (279.4 mm) |
| Maximum Stance | 17.25" (438.15 mm) |
| Closed Width | 5.0" (127 mm) |
| Weight | 23.92 oz |
| Finish | Black |
The WB-5 mounts to any Picatinny rail (1913 standard), which covers most modern rifle forends. The quick-detach system clicks on and off without tools, so it works equally well as a permanent mount or a quick-swap accessory between rifles.
The WB-5 ranges from 5.5 inches at minimum height to 10 inches at maximum, with nine notch positions in between. That spread covers bench shooting, prone positions, and most field setups. The nine steps let you dial in the exact sight picture your optic and rifle need.
Yes. Each of the four legs is independent—just pull the spring-loaded leg downward and lock it into your chosen position (90° or 45°). You can dial legs separately to handle uneven ground or adjust your shooting angle on the fly.
No. The WB-5 has a lever-locked cant adjustment for shooting at angles. Hand-tighten only—do not use tools to adjust canting tension.