Accu-Tac SR-5 G2 Arca Spec QD Bipod - Precision Shooting Stabilizer with Quick-Detach FeatureAccu-Tac$412.30
Loading...
Loading...
Loading...
Loading...
Accu-Tac
The Accu-Tac HD-50 Arca Spec QD bipod is engineered for shooters running heavy-recoil platforms—especially 50 BMG rifles and extreme long-range ELR setups where stability and durability aren't negotiable. This is Accu-Tac's most robust offering: a quick-detach bipod built to absorb punishment and keep your rifle locked in place shot after shot. The oversized arm lock lugs are reinforced to handle the violent recoil of magnum and ultra-heavy calibers, while the throw lever gives you real control over canting tension and lets you lock the angle in once you've dialed it in.
Height and positioning flexibility matter on the line. The HD-50 extends across nine height settings—from 7.25" to 10.25"—so you can dial in the perfect sight picture whether you're prone on dirt, elevated on a bench, or anywhere in between. The legs deploy in four individual positions and can stow forward or angle 90 degrees straight down, adapting to your rig and terrain. A wide center hub distributes recoil load across a larger footprint, translating to the rock-solid stability you need when every shot counts.
Built from 6061-T6 aluminum alloy and reinforced high-strength steel hardware, the HD-50 won't flex under pressure. The Arca Spec quick-detach mount means you can strip it off and swap it to another Arca-compatible rifle in seconds—no tools, no fuss. If you're serious about precision at distance and you're shooting a rifle that demands a bipod tough enough to match its power, the Accu-Tac HD-50 delivers.
| Mount Type | Arca Spec QD |
| Minimum Height | 7.25" (184.15 mm) |
| Maximum Height | 10.25" (260.35 mm) |
| Maximum Stance Width | 14.5" (444.5 mm) |
| Minimum Stance Width | 13.5" (342.9 mm) |
| Material | 6061-T6 Aluminum alloy with high-strength steel hardware |
| Leg Positions | Four individual positions (forward stowable and 90-degree straight down) |
| Height Options | Nine adjustable settings |
The HD-50 is engineered for 50 BMG platforms and heavy extreme long-range (ELR) rifles. It uses an Arca Spec quick-detach mount, so it will fit any rifle or chassis with an Arca-compatible mounting surface.
Yes. The HD-50 features an adjustable throw lever that lets you cant the bipod and lock the angle into place. The lever also allows you to adjust tension and reposition it to fine-tune the cant once you've found your sweet spot.
The legs extend from a minimum height of 7.25" up to a maximum of 10.25", with nine height settings in between so you can dial in the exact sight picture you need.
Yes, the HD-50 ships with an Arca Spec quick-detach mount ready to attach to your rifle or chassis.
Accu-Tac
The Accu-Tac HD-50 Arca Spec QD bipod is engineered for shooters running heavy-recoil platforms—especially 50 BMG rifles and extreme long-range ELR setups where stability and durability aren't negotiable. This is Accu-Tac's most robust offering: a quick-detach bipod built to absorb punishment and keep your rifle locked in place shot after shot. The oversized arm lock lugs are reinforced to handle the violent recoil of magnum and ultra-heavy calibers, while the throw lever gives you real control over canting tension and lets you lock the angle in once you've dialed it in.
Height and positioning flexibility matter on the line. The HD-50 extends across nine height settings—from 7.25" to 10.25"—so you can dial in the perfect sight picture whether you're prone on dirt, elevated on a bench, or anywhere in between. The legs deploy in four individual positions and can stow forward or angle 90 degrees straight down, adapting to your rig and terrain. A wide center hub distributes recoil load across a larger footprint, translating to the rock-solid stability you need when every shot counts.
Built from 6061-T6 aluminum alloy and reinforced high-strength steel hardware, the HD-50 won't flex under pressure. The Arca Spec quick-detach mount means you can strip it off and swap it to another Arca-compatible rifle in seconds—no tools, no fuss. If you're serious about precision at distance and you're shooting a rifle that demands a bipod tough enough to match its power, the Accu-Tac HD-50 delivers.
| Mount Type | Arca Spec QD |
| Minimum Height | 7.25" (184.15 mm) |
| Maximum Height | 10.25" (260.35 mm) |
| Maximum Stance Width | 14.5" (444.5 mm) |
| Minimum Stance Width | 13.5" (342.9 mm) |
| Material | 6061-T6 Aluminum alloy with high-strength steel hardware |
| Leg Positions | Four individual positions (forward stowable and 90-degree straight down) |
| Height Options | Nine adjustable settings |
The HD-50 is engineered for 50 BMG platforms and heavy extreme long-range (ELR) rifles. It uses an Arca Spec quick-detach mount, so it will fit any rifle or chassis with an Arca-compatible mounting surface.
Yes. The HD-50 features an adjustable throw lever that lets you cant the bipod and lock the angle into place. The lever also allows you to adjust tension and reposition it to fine-tune the cant once you've found your sweet spot.
The legs extend from a minimum height of 7.25" up to a maximum of 10.25", with nine height settings in between so you can dial in the exact sight picture you need.
Yes, the HD-50 ships with an Arca Spec quick-detach mount ready to attach to your rifle or chassis.
