Loading...
Loading...
Loading...
Loading...
MPA
The MPA 5/8x24" muzzle brake for 6.5mm and smaller calibers is built for shooters who demand measurable recoil reduction on the firing line. Whether you're dialing in at a PRS competition, running precision rifle matches, or simply trying to stay behind the scope for critical follow-up shots, this brake delivers the kind of gas-management performance that lets you focus on accuracy instead of fighting the gun. The design redirects propellant gases through strategically positioned blast ports to actively counter recoil — MPA's testing shows a 63% reduction, which translates to meaningful control when every shot counts.
Built from black nitrided high-tensile steel, this brake is engineered to handle the pressures of modern rifle loads without compromise. The construction uses a jam nut collar system that threads directly onto your 5/8-24 muzzle, then locks in place once aligned — no shims, no guessing. Two machined flats on the brake body let you level it square to the bore while providing wrench flats for installation, ensuring the brake sits perpendicular to the barrel shoulder. That precision alignment matters: it minimizes point-of-impact shift that can plague careless muzzle brake installs.
If you're shooting 6.5 Creedmoor, 6.5 PRC, or any smaller-diameter cartridge with a 5/8-24 threaded muzzle, this brake is purpose-built to keep your sight picture intact through the recoil impulse. It's the kind of tool that separates clean, fast strings from slow, labored ones.
| Thread Size | 5/8-24 TPI |
| Caliber Compatibility | 6.5mm and smaller |
| Material | Black nitrided high-tensile steel |
| Recoil Reduction | 63% |
| Installation | Jam nut collar system with adjustable wrench flats |
This brake is designed for 6.5mm calibers and smaller. That includes 6.5 Creedmoor, 6.5 PRC, 6.5-284 Norma, and similar rounds, as well as smaller-diameter calibers with a 5/8-24 thread pitch.
MPA's testing shows a 63% reduction in recoil impulse through the optimized blast port design. This level of reduction is significant enough to help shooters maintain sight picture for faster follow-up shots in competition or field scenarios.
No. The jam nut collar system and dual machined flats allow you to level and align the brake directly on the muzzle threads without shims. This simplifies installation and ensures the brake sits perpendicular to the barrel shoulder to minimize point-of-impact shift.
An adjustable wrench is all you need. The dual machined flats on the brake body provide interface points for the wrench, allowing you to tighten and align the brake securely.
MPA
The MPA 5/8x24" muzzle brake for 6.5mm and smaller calibers is built for shooters who demand measurable recoil reduction on the firing line. Whether you're dialing in at a PRS competition, running precision rifle matches, or simply trying to stay behind the scope for critical follow-up shots, this brake delivers the kind of gas-management performance that lets you focus on accuracy instead of fighting the gun. The design redirects propellant gases through strategically positioned blast ports to actively counter recoil — MPA's testing shows a 63% reduction, which translates to meaningful control when every shot counts.
Built from black nitrided high-tensile steel, this brake is engineered to handle the pressures of modern rifle loads without compromise. The construction uses a jam nut collar system that threads directly onto your 5/8-24 muzzle, then locks in place once aligned — no shims, no guessing. Two machined flats on the brake body let you level it square to the bore while providing wrench flats for installation, ensuring the brake sits perpendicular to the barrel shoulder. That precision alignment matters: it minimizes point-of-impact shift that can plague careless muzzle brake installs.
If you're shooting 6.5 Creedmoor, 6.5 PRC, or any smaller-diameter cartridge with a 5/8-24 threaded muzzle, this brake is purpose-built to keep your sight picture intact through the recoil impulse. It's the kind of tool that separates clean, fast strings from slow, labored ones.
| Thread Size | 5/8-24 TPI |
| Caliber Compatibility | 6.5mm and smaller |
| Material | Black nitrided high-tensile steel |
| Recoil Reduction | 63% |
| Installation | Jam nut collar system with adjustable wrench flats |
This brake is designed for 6.5mm calibers and smaller. That includes 6.5 Creedmoor, 6.5 PRC, 6.5-284 Norma, and similar rounds, as well as smaller-diameter calibers with a 5/8-24 thread pitch.
MPA's testing shows a 63% reduction in recoil impulse through the optimized blast port design. This level of reduction is significant enough to help shooters maintain sight picture for faster follow-up shots in competition or field scenarios.
No. The jam nut collar system and dual machined flats allow you to level and align the brake directly on the muzzle threads without shims. This simplifies installation and ensures the brake sits perpendicular to the barrel shoulder to minimize point-of-impact shift.
An adjustable wrench is all you need. The dual machined flats on the brake body provide interface points for the wrench, allowing you to tighten and align the brake securely.
